SPECIFICATIONS
-
FRAME
All New Series 3 6061 Aluminum Frame, 26″ Wheels, 130mm Travel, MultiTrac Suspension Platform, 135mm Open Dropout (Upgradeable to 142x12mm Thru-Axle), 73mm Threaded BB
-
FRONT SUSPENSION
X-Fusion Velvet RLC 26″, 130mm Travel, Compression and Rebound Adjustment, 100x15mm Thru-Axle
-
REAR SUSPENSION
X-Fusion O2 Pro R, 190x51mm, Custom Tune, M8x22.2mm Hardware
-
RIMS
Marin, Double Wall Alloy, 27mm Inner, Pinned Joint, Disc Specific, Tubeless Compatible
-
HUB, REAR
Forged Alloy, 135mm, Quad Sealed Bearings, Centerlock Disc, 32H
-
HUB, FRONT
Forged Alloy, 100x15mm, Centerlock Disc, 32H
-
SPOKE, NIPPLES
14g Stainless Steel
-
TIRES
Vee Tire Co, Flow Snap 26×2.4″, Tackee Compound, Wire Bead
-
DERAILLEUR, REAR
Shimano Deore, 11 Speed, SGS
-
DERAILLEUR, FRONT
–
-
SHIFT LEVER
Shimano Deore, 11-Speed, SL-5100R
-
CRANKSET
Marin Forged Alloy, Integrated Steel 32T Narrow Wide Chainring, Boost Spacing, 170mm Length
-
BOTTOM BRACKET
External Sealed Cartridge Bearings
-
CHAIN
KMC X-11 Silver and Black
-
CASSETTE
SunRace, 11-Speed, 11-51T, ED Black
-
BRAKE, FRONT
Shimano MT-201 Hydraulic Disc, 180mm Rotor
-
BRAKE, REAR
Shimano MT-201 Hydraulic Disc, 160mm Rotor
-
BRAKE LEVERS
Shimano BL-MT201 Hydraulic
-
HANDLEBAR
Marin Mini-Riser, 6061 Double Butted Aluminum, 15mm Rise, 720mm Width, 4º Up, 9º Back
-
STEM
Marin 3D Forged Alloy, 35mm
-
GRIPS
Marin Dual Density
-
HEADSET
FSA No 57E, Semi-Sealed Cartridge Bearings, 1 1/8″ x 1 1/2”
-
SEATPOST
Marin Alloy, 30.9mm
-
SADDLE
Marin Speed Concept
-
PEDALS
–
-
EXTRAS
Closed 9-12 Thru-Axle QR System
Specifications, pricing, and availability are subject to change without notice.
GEOMETRY
ONE SIZE | |
---|---|
STACK | 537.57 |
REACH | 380 |
HEADTUBE ANGLE | 65.5° |
HEADTUBE LENGTH | 95 |
SEATTUBE ANGLE | 76° |
SEATTUBE LENGTH | 315 |
TOPTUBE EFFECTIVE | 515.17 |
BB HEIGHT | 308.5 |
BB DROP | 10 |
CHAINSTAY | 425 |
WHEELBASE | 1089 |
STANDOVER HEIGHT | 614 |
FORK OFFSET | 42 |
SEATPOST DIAMETER | 30.9 |
HANDLEBAR WIDTH | 720 |
STEM LENGTH | 45 |
CRANK LENGTH | 170 |
All lengths in millimeters
TECHNOLOGY
TRAIL GEOMETRY
We put as much attention when designing the Rift Zone 26/Jr as we do the adult bikes, so young riders get to experience modern long/low/slack geometry, enhancing comfort and control when the trail gets steep and/or rough.
AIR SUSPENSION
Easily adjustable air suspension is tunable for a growing kid.
INTERNAL CABLE & HOSE ROUTING
The Rift Zone 26 and Rift Zone Jr are compatible with internally routed dropper posts, with internal rear derailleur routing for a clean look and snag free ride. Unused ports come pre-plugged, to keep the frame insides clean.
DISC BRAKES
Hydraulic disc brakes provide smooth, controlled stopping in all conditions with minimal maintenance.
24” WHEELS – UPGRADEABLE TO 26”
The 24″ wheel Rift Zone Jr can fit 26” wheels down the road, extending its life and versatility.
SUSPENSION SETUP
REAR SHOCK SETUP
Recommended Sag = 30%/15mm
Step 1: Set correct pressure in rear shock.
Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
Step 5: Adjust rebound setting to ensure proper control.
FORK SETUP
Marin recommends that all bikes front and rear suspension feel balanced
Step 1: After rear sag is set follow the recommended pressure from the fork manufacturer.
Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.
X-FUSION O2 PRO R
LBS | KG | PSI |
---|---|---|
40 | 18 | 40 |
50 | 23 | 50 |
60 | 27 | 60 |
70 | 32 | 70 |
80 | 36 | 80 |
90 | 41 | 90 |
100 | 45 | 100 |
110 | 50 | 110 |
120 | 54 | 120 |
Reviews
There are no reviews yet.